|
| |
Nr. 0.208 GB
May 2001, Sfb (4-) Sq 4
Latest update Marts 2011
|
 |
|
Highly elastic sealant for movement joints in ceramic tilings, and for use on exterior facades.
• For wet rooms and sanitary installations
• Prevents mould and mildew growth
• easy to apply
|
|
| Product |
|
High-elastic one-component sealant on the basis of silicone rubber.
Cures neutrally when exposed to air humidity.
|
|
| Colours |
|
Available in colours to match cement-based Alfix Cerafill range: grey, pale grey, and steel grey.
|
|
| Coverage |
| Joint dimension B x D |
Linear metres per cartridge |
| 8 x 4 mm |
approx. 9.0 |
| 10 x 5 mm |
approx. 5.5 |
| 15 x 7 mm |
approx. 2.5 |
|
|
| Packaging |
Available in 300 ml cartridges.
|
|
| Properties |
Alfix S-Silicon retains elasticity and produces a long life weather- and waterproof joint resistant to mildew.
|
|
| Applications |
Particularly suitable for expansion joints in ceramic surfaces, sealing around pipe passages, and sanitary installations.
Excellent adhesion without priming to glass, ceramic tiles, enamel, metals, painted surfaces, and varnished wood.
Do not use Alfix S-Silicon for natural stone. Use Alfix M-Silicon.
|
|
| Surface preparation |
Surfaces should be clean and dry and free from dust, grease and oil.
For degreasing use acetone or ethanol.
Shining metals or plastics should be sanded.
For sealing tiled surfaces, joints should be clean down to original substrate.
Deep joints should be filled with a backing material, such as polyethylene foam, to support sealant and prevent adhering to bottom of the joint.
|
|
| Application |
Use masking tape to protect tiles.
Fill joints completely using appropriate gun. Finish off within 15 minutes by smoothing using a damp tool, such as Alfix Silicon smoothing kit or joint nail.
Remove any masking tape immediately after smoothing.
|
|
| Cleaning |
Uncured sealant: Acetone
Cured sealant: mechanical
|
|
| Technical enquiries |
Product health and safety data /COSH
For further information, please consult our Technical Services Dept.
|
|
| Technical data |
| Working temperature |
-5°C - +40°C
|
| Density |
1.03 kg/litre
|
|
Formation of skin
|
approx. 15 minutes
|
|
Curing speed
|
approx. 1 mm/day
|
| Temperature resistance |
-40 °C - +150°C |
| Shore-A-hardness |
approx. 18 shore A |
|
Maximum movement
|
+/- 25% of original joint width
|
| Shrinkage |
approx. 7% |
| Shelf life |
Min. 12 months in unopened cartridges. Store cool.
|
|
|
|
| |
Safety data sheet
PDF printfil